 |
 |
|
|
|
 |
| | ||||||||||||||||||||||||
|
| ||||||||||||||||||||||||
|
Paul Chen Tinker Pearce Norman Swords Blunt
The Tinker Series Norman swords have an overall length of 36 5/16", a blade length of 30 11/16" and a handle length of 5". Sword weighs in at about 2lb 8oz. Norman Swords, with their distinctive cruciform guards and brazil-nut pommels, are similar in weight and static balance and offer virtually identical handling characteristics. Both are harmonically balanced to optimize cutting ability in the case of the sharp version and to provide authentic handling characteristics for the re-enactor. The blades are forged in 5160 high carbon steel and marquenched to HRC50-52, allowing superior edge retention on the sharp and anti-burr safety on the blunt. Grips are wood-cored and leather-covered over a cord wrap. Made by Hanwei.
Paul Chen Tinker Pearce Norman Swords Sharpened
The Tinker Series Norman swords have an overall length of 36 1/2", a blade length of 30 3/4" and a handle length of 5". Sword weighs in at about 2lb 5oz. Norman Swords, with their distinctive cruciform guards and brazil-nut pommels, are similar in weight and static balance and offer virtually identical handling characteristics. Both are harmonically balanced to optimize cutting ability in the case of the sharp version and to provide authentic handling characteristics for the re-enactor. The blades are forged in 5160 high carbon steel and marquenched to HRC50-52, allowing superior edge retention on the sharp and anti-burr safety on the blunt. Grips are wood-cored and leather-covered over a cord wrap. Made by Hanwei.
Paul Chen Tinker Pearce Great Swords of War
The Great Sword of War has an overall overall length of 47 5/8", it has a blade length of 35 7/8", a handle length of 11" and weighs 3lb 14oz. These swords are designed and crafted purely as a cutting sword and, weighing in at a little less than four pounds, it is built to excel on heavy targets. The 11” grip provides excellent leverage and static and dynamic balance are to Tinker’s demanding standards. The blade is again forged in 5160 and marquenched to HRC50-52. The hilt is retained by Tinker’s signature recessed sleeve mounting system, providing secure retention and easy hilt tightening, using the Allen wrench provided. Made by Hanwei.
Paul Chen Tinker Pearce Viking Swords Blunt
Paul Chen Tinker 9th Century Viking Sword Blunt has an
overall length of 37.5" with a 30.12" 5160 marquenched spring steel blade.
While not a direct copy of any particular sword, the Viking sword design was
inspired by historical examples from the early 9th Century, most notably
finds from the area around Trondheim, Norway, where the circular indentation
hilt decoration was popular. The scabbards are provided with suspension
points and a period chape, giving the sheathed sword a very attractive
appearance. The construction of the Viking "pair" differs from other swords
in the Tinker series inasmuch as they are tang-riveted (peened) in period
fashion at the pommel, primarily to satisfy Viking re-enactment
requirements, and the blunt blade design is very much directed towards
re-enactment rather than sparring. However, as with the other swords in the
series, replacement blades are available and Tinker is offering a
blade-replacement and re-peening service for users unable to undertake the
task themselves.
Paul Chen Tinker Pearce Viking Swords Sharp
Paul Chen Tinker 9th Century Viking Sword Sharp has an
overall length of 37.37" with a 30.87" 5160 marquenched spring steel blade.
While not a direct copy of any particular sword, the Tinker Viking sword
design was inspired by historical examples from the early 9th Century, most
notably finds from the area around Trondheim, Norway, where the circular
indentation hilt decoration was popular. The scabbards are provided with
suspension points and a period chape, giving the sheathed sword a very
attractive appearance. The construction of the Viking "pair" differs from
other swords in the Tinker series inasmuch as they are tang-riveted (peened)
in period fashion at the pommel, primarily to satisfy Viking re-enactment
requirements. However, as with the other swords in the series, replacement
blades are available. The breadth of the Sharp makes for an efficient
cutting profile.
Paul Chen Tinker Pearce Early Medieval Swords Blunt
Paul Chen Tinker Early Medieval Sword Blunt has an overall
length of 38" with a 31" 5160 marquenched spring steel blade. Tinker Early
Medieval Swords are single-hand Oakeshott Type XII pieces, again having
sharp and blunt versions with identical handling characteristics. The blunt
uses a broad, flat fuller to move mass towards the edges for safety while
retaining a very lively feel. The cruciform hilt is attractive and
functional.
Paul Chen Tinker Pearce Early Medieval Swords Sharp
Paul Chen Tinker Early Medieval Sword Sharp has an overall
length of 38.5" with a 31.75" 5160 marquenched spring steel blade. Tinker
Early Medieval Swords are single-hand Oakeshott Type XII pieces, with sharp
and blunt versions with identical handling characteristics. The sharp is
fullered for about two thirds of its length, with a flattened diamond
section out towards the tip. The cruciform hilt is attractive and
functional.
Paul Chen Tinker Pearce Bastard Swords Blunt
Paul Chen Tinker Bastard Swords Blunt Tip have an overall
length of 42.75" with a 33.37" 5160 marquenched spring steel blade. Our
Tinker Bastard swords are based on the Oakeshott Type XVIIIA and are
designed so that both the sharp and blunt versions will perform identically
in the hand, offering the possibility of sparring and cutting with swords
that feel and respond in exactly the same way. The blunt has a long, broad
fuller, to compensate for the edge thickness, and thhe tip is sufficiently
flexible to provide an adequate level of safety. Wheel-type pommels are
sized to provide a grip for the second hand when required, and the straight
tapering cross provides excellent hand protection.
Paul Chen Tinker Pearce Bastard Swords Sharp
Paul Chen Tinker Bastard Swords Sharp have an overall length
of 42.75" with a 33.37" 5160 marquenched spring steel blade. Our Tinker
Bastard swords are based on the Oakeshott Type XVIIIA and is designed so
that both the sharp and blunt versions will perform identically in the hand,
offering the possibility of sparring and cutting with swords that feel and
respond in exactly the same way. The sharp blade is produced in two slightly
different versions - this version is diamond-sectioned throughout its length
Wheel-type pommels are sized to provide a grip for the second hand when
required, and the straight tapering cross provides excellent hand
protection.
Hanwei Tinker Bastard Swords
Hanwei Tinker Bastard Swords are 42.75" overall. These swords
have a sharpened blade created of 5160 marquenched spring steel. Blade
length is 33 3/8”. Diamond-sectioned throughout but fullered for about one
third of its length. The design of the wheel-type pommel provides a grip for
the second hand when required, and the straight tapering cross provides
superb hand protection. Finely crafted by Hanwei, Tinker Bastard Swords have
a handle length of 9 3/8” and a weight of 2lb, 6 oz (individual
specifications may vary per sword).
Paul Chen Tinker Pearce Longswords Blunt
Paul Chen Tinker Longswords Blunt have an overall length of
47" with a 35" 5160 marquenched spring steel blade. Tinker Longswords
provide the WMA practitioner with a fast, well-balanced pair of swords that
will perform beautifully in skilled hands. The Blunt Trainer features nearly
identical handling to that of its sharp companion, but with thick edges and
a rounded tip for safe sparring practice.
Paul Chen Tinker Pearce Longswords Sharp
Paul Chen Tinker Longswords Sharp have an overall length of
47" with a 35" 5160 marquenched spring steel blade. Our Tinker Longswords
provide the WMA practitioner with a fast, well-balanced pair of swords that
will perform beautifully in skilled hands. The demi-fullered sharp blades
exhibit a quick profile taper with a diamond section out to the tip,
providing the necessary stiffness for the cutting stroke. The flattened
scent-stopper pommel (Type T-1) forms a natural extension of the double-hand
grip and the square-section guard provides solid security.
Go to CAS Hanwei Medieval Swords Main Page
| ||||||||||||||||||||||||
Tinker Pearce Swords
